A6 Sedan V6-3.2L (BKH) (2007)
/Page-6199001.png)
Air Bag: Procedures
Passive Occupant Detection System, Measures Required After an Accident
Passive Occupant Detection System, Measures Required after an Accident
‹› A re-zero procedure must be performed on the passenger occupant detection system control module each time the front passenger airbag and/or
belt tensioner deploys.
‹› If seat rails and/or seat pan is replaced due to deformations resulting from a crash, the passive occupant detection system must be replaced using
the passive occupant detection system service kit. Then, basic setting as well as a RE-ZERO procedure must be performed on the passive occupant
detection system control module.
