A6 Sedan V6-3.2L (BKH) (2007)
Power Steering Pump Seal: Service and Repair
Power Steering Pump Gasket and O-Ring
Power Steering Pump Gasket and O-Ring
Special tools, testers and auxiliary items required
‹› Pry lever (T20143/1)
‹› Assembly tool (T40052)
Removing
-
Remove power steering pump => [ Removing ] See: Service and Repair/Power Steering Pump.
-
Pry seal out with the pry lever (T20143/1).
-
Replace O-ring - 2 - in the power steering pump input shaft.
Installing
Installation is in reverse order of removal. Observe the following when doing so:
-
Coat O-ring - arrow - lightly with engine oil and insert it in the power steering pump input shaft.