A6 Sedan V6-3.2L (BKH) (2007)
/Page-5519001.png)
Ride Height Sensor: Procedures
Control arm, guide link, level control system sensor, assembly overview
1 - Hex bolt 70 Nm plus an additional 180° turn
^
Always replace after removal
2 - Guide link
3 - Wheel bearing housing
4 - Self-locking hex nut, 110 Nm
^
Always replace after removal
^
After loosening threaded connection of guide link to wheel bearing housing, adhesive residue must be removed on thread of linkage stub.
5 - Self-locking hex nut, 110 Nm
^
Always replace after removal
^
After loosening threaded connection of control arm to wheel bearing housing, adhesive residue must be removed on thread of linkage stub.
6 - Hex nut
^
Always replace after removal
7 - Hex bolt 40 Nm plus an additional 90° turn
^
Always replace after removal
8 - Shock absorbers
9 - Hex bolt 90 Nm and turn an additional 90°
^
Always replace after removal
10 - Stabilizer
11 - Self-locking hex nut, 8 Nm
