A6 Sedan V6-3.2L (BKH) (2007)
/Page-5698002.png)
-
Install wheel hub support T10149 with wheel bolt - arrow -.
-
Insert wheel hub support T10149 in engine/transmission jack V.A.G. 1383 A and raise wheel housing bearing approx. 5 cm.
-
Disconnect threaded connection - 1 -.
-
Remove threaded connection - 2 - and pull wheel housing liner aside.
-
Remove hex bolts - 1 -.
-
Remove shock absorber.
Installing
Installation is in reverse order of removal.
