A6 Sedan V6-3.2L (BKH) (2007)
/Page-3644002.png)
-
Remove rear noise insulation by loosening fasteners - 2 - and, if equipped, - arrow -.
-
Place old oil collecting and extracting device (V.A.G 1782) beneath transmission.
CAUTION!
Wear protective glasses.
-
Remove ATF drain plug - A - using triple square socket driver (3357) and drain ATF.
-
Tighten ATF drain plug again.
‹› Tightening Specifications 24 Nm.
-
Remove ATF inspection plug - B -.
-
Thread connection on shut-off valve of ATF filler system F/CVT transmission (VAS 5162) into opening of ATF inspection plug - B -.
-
Rotate shut-off valve in direction of filler hose - lower arrow -. ATF flows into transmission.
