A6 Sedan V6-3.2L (BKH) (2007)
-
Before installing Transmission Control Module (TCM) J217, coat new O-rings - A - on hydraulic control module with ATF.
-
Install Transmission Control Module (TCM) J217 without canting it.
^
Harness connectors - A -, - B - and - C - on rear side of control module must engage on hydraulic control module.
-
Tighten bolts - arrows -.
-
Install end cover.
After connecting Transmission Control Module (TCM) J217, these work steps must be performed:
^
Perform coding of a new Transmission Control Module (TCM) J217
^
Perform adaptation for Transmission Control Module (TCM) J217.
Use Vehicle Diagnosis, Testing and Information System VAS 5051 for this.