A6 Sedan V6-3.2L (BKH) (2007)
Windshield: Removal and Replacement
Assembly Overview
Assembly Overview
1
-
Plenum chamber cover
-
For new replacement windows, a protective piping is located in the retaining strip, which must be pulled off before installing plenum
chamber cover.
-
Press into fastening strip only after window adhesive curing time has elapsed.
2
-
Water deflector
-
Press into retaining clips to stop only after the minimum curing time for the adhesive.
-
When pressing in drip rail, make sure sealing lip lies flat against windshield -arrow- and does not slip behind edge of windshield.
3
-
Windshield
-
Distance to roof dimension - a - = 2 mm" + .5mm
-
Align distance at sides.
4
-
Cover profile
-
Can be replaced.
5
-
Adhesive sealing material
-
Observe curing times.
-
Note varying spacing dimensions to window edge:
-
Dimension - b - = 18 mm ± 2 mm
-
Dimension - c - = 8 mm ± 2 mm
-
Dimension - d - = 20 mm ± 2 mm