A8 Quattro Sedan V8-4.2L (AKB) (2002)
Remote Control: Testing and Inspection
Check DTC Memory (Function 02)
NOTE: The displayed DTC information is updated only when initiating OBD or with "Erase DTC Memory" function 05.
-
Switch printer on via the PRINT button (indicator lamp in button lights up).
Indicated on display:
Rapid data transfer
HELP
Select function XX
-
Press buttons -0- and -2-. This selects "Check DTC Memory", function 02.
Indicated on display:
Rapid data transfer
Q
02 - Check DTC Memory
-
Press -Q- button to confirm input.
Display indicates the number of stored DTCs.
X malfunctions recognized!
The stored DTCs are displayed and printed out in sequence.
-
Check print-out against DTC table and repair malfunction.
If "No DTC recognized!" is displayed, the program will return to "Select function XX" after the -> button is pressed.
No DTC recognized
->
Indicated on display:
Rapid data transfer
HELP
Select function XX
If something else is displayed:
See Operating instructions for Scan Tool (ST)
-
End Output (function 06).
-
Switch off ignition and disconnect data link connector.