A8 Quattro Sedan V8-4.2L (AKB) (2002)
Remote Control: Testing and Inspection
Erase DTC Memory and End Output (Function 05 and 06)
NOTE: If DTC memory cannot be erased, check DTC memory again and repair malfunction.
Requirements
-
DTC memory checked.
-
All malfunctions repaired.
After successful DTC memory check:
Indicated on display:
Rapid data transfer
HELP
Select function XX
-
Press buttons -0- and -5-. This selects "Erase DTC Memory", function 05.
Indicated on display:
Rapid data transfer
Q
05 - Erase DTC Memory
-
Press -Q- button to confirm input.
Indicated on display:
Rapid data transfer
->
DTC Memory is erased!
DTC memory is erased.
-
Press -> button.
Indicated on display:
Rapid data transfer
HELP
Select function XX
NOTE:
-
Test sequence is faulty if this message is displayed.
Attention!
->
DTC memory was not checked
-
Test sequence is faulty if this message is displayed.
Rapid data transfer
->
DTC memory was not checked
-
Follow test procedure closely: first check DTC memory, repair malfunction(s) if necessary, then erase.
End Output
-
Press buttons -0- and -6-. This selects "End Output", function 06.
Indicated on display:
Rapid data transfer
Q
05 - End Output
-
Press -Q- button to confirm input.
Indicated on display: