A8 Quattro Sedan V8-4.2L (AKB) (2002)
Remote Control: Testing and Inspection
Code Control Module (Function 07)
Control modules for multi-function steering wheel with index "D" and "L" can be coded as follows:
-
Steering wheel version
-
With or without Tiptronic
-
Language version
NOTE:
-
Varying combination possibilities of the multi-function steering wheel are adjusted via coding.
-
The code table lists only those combinations applicable to the Audi A8.
-
In every case, it must be coded according to vehicle equipment.
Initiating coding
Indicated on display:
Rapid data transfer
HELP
Select function XX
-
Press buttons -0- and -7- to select "Code Control Module" function 07.
Indicated on display:
Rapid data transfer
Q
07 - Code Control Module
-
Confirm input using the -Q- button.
Indicated on display:
Code control Module
Q
Enter code numbers XXXXX
06812
-
Enter code number using code table.
Coding: e.g. 00111
-
First digit; empty: 0 = Standard
-
Second digit; empty: 0 = Standard
-
Third digit; language version: 1 = English
-
Fourth digit; Tiptronic: 1 = with Tiptronic
-
Fifth digit; steering wheel version: 1 = Radio, Telephone, Navigation
-
Confirm input using the -Q- button.
-
Control module identification will appear on the display together with the coding that was entered (00111).
4B0907487L str. whl. elect.USA D01
->
Coding
00111
-
End coding with the -> button.
Indicated on display:
Rapid data transfer
HELP
Select function XX
-
Press buttons -0- and -6-.
Indicated on display:
Rapid data transfer
Q
06 - End Output
-
Press -Q- button to confirm input.