A8 Quattro Sedan V8-4.2L (AKB) (2002)
Hood Latch Release Cable: Service and Repair
Hood Lock Cable, Removing And Installing
1
-
Hood lock cable
Removing:
-
Remove storage compartment on driver's side.
-
Remove bolts - 3 -.
-
Remove clamping nipple - 6 -.
-
Unclip cable from clip - 4 -, pull through bulkhead, unclip from actuating mechanism - 2 - and remove.
Adjusting:
-
Install cable without putting tension on locking lever - 7 - and secure cable tightly with clamping nipple - 6 -.
2
-
Operating mechanism
3
-
Bolts (2x)
-
55 Nm (41 ft.lb.)
4
-
Clips (2x)
5
-
Guide sleeve