A8 Quattro Sedan V8-4.2L (AKB) (2002)
-
To check timing, bolt -3242- in bore at upper section of oil pan again.
-
Check camshaft positions using -T40005-.
Note:
If camshaft locator cannot be inserted, repeat adjustment.
-
Remove -T40005- from both cylinder heads.
-
Remove -3242-.
-
Bolt locking bolt of TDC marking into upper section of oil pan using new sealing ring.
Further installation is in reverse order of removal, note the following:
Note:
^
Replace gaskets, seals and O-rings.
^
Secure all hose connections using hose clamps appropriate for the model type.
-
Install ribbed belt.
Note:
^
Only reuse drained coolant if cylinder head or engine block was not replaced.
^
Dirty coolant must not be re-used.