A8 Quattro Sedan V8-4.2L (AKB) (2002)
Trunk/Liftgate Sensor/Switch (For Alarm): Service and Repair
Rear Lid Contact Switch, Removing and Installing
Removing:
-
Remove rear lid lock.
-
Disconnect electrical connector.
-
With rear lid lock -1- removed, use flat-tip screwdriver to unclip plastic cover plate -3- on both rivets -4-.
-
Move lever -2- in direction of arrow and flip plastic cover -3- toward rear.
-
Carefully remove contact switch -3- from rear lid lock -1-.
Installing:
-
Carefully insert contact switch in mounting in rear lid lock assembly.