A8 Quattro Sedan V8-4.2L (AKB) (2002)
Power Steering Pump: Service and Repair
Vane Pump Assembly Overview
Vane Pump Assembly Overview
Notes:
^
Replace sealing rings.
^
Do not reuse drawn off hydraulic oil.
^
Hydraulic oil. Part No. G 002 000
^
When vane pump is replaced, always check alignment of pulleys of AIC compressor and vane pump.
1 - Combi bolt, 25 Nm (18 ft. lbs.)
2 - Ribbed belt
3 - Hex socket head bolt, 25 Nm (18 ft. lbs.)
4 - Belt pulley
5 - Shims
6 - Sleeve, slotted
^
Used to offset tolerances
7 - Hex bolt, 25 Nm (18 ft. lbs.)
8 - Expansion hose
^
Ensure correct installation position; danger of chafing
9 - Banjo bolt, 50 Nm (37 ft. lbs.)
10 - Seal
^
Always replace
11 - Suction hose
^
Ensure correct installation position to reduce the risk of chafing