A8 Quattro Sedan V8-4.2L (AKB) (2002)
Fig. 3 Pressing out bonded rubber bushing
^
Insert special tool 3349 into second half of bushing.
^
Insert thrust piece 3349/1 with threaded stem 3046.
^
Press off second half of bushing by screwing in stem 3046.
Fig. 4 Pressing in bonded rubber bushing
^
Install new bushings in wheel bearing housing using thrust pieces 3292/3 and threaded stem.
Note: Install bushings carefully to avoid tilting.
^
Screw thrust pieces together as far as they will go.
Replacing one-piece bushing