A8 Quattro Sedan V8-4.2L (AKB) (2002)
/Page-1488002.png)
^
Remove guide link joint pin nut and press off joint pin.
Do not damage joint protective boot when doing this!
^
Pull ABS wheel-speed sensor -2- out of wheel bearing housing.
^
Detach ABS wheel-speed sensor wiring -arrows-.
^
Detach wiring - 1. for brake-pad wear indicator.
^
Remove suspension strut/track control link bolt -3-.
^
Remove nut -1- and remove hex bolt.
Note:
^
Slots in wheel bearing housing must not be enlarged.
Do not loosen bolts -3- and -4-.
Otherwise the alignment must be checked!
^
Pull out the two links -2-.
