A8 Quattro Sedan V8-4.2L (AKB) (2002)
Transmission Speed Sensor: Service and Repair
Sensor For Transmission RPM -G182-, Replacing
Sensor for transmission RPM -G182-, replacing
Note:
-
Do not use sensor that has been dropped (the permanent magnet will break if it is dropped).
Removing
^
Remove valve body.
^
Disconnect connector -A- from back of valve body.
^
Remove -G182- (-B-) from valve body.
Installing
^
Install -G182- (-1-) together with both spacer sleeves -2- (height: 8.7 mm or 0.34 inch).
^
Connect sensor connector.
^
Install valve body.
Note:
The side of the sensor with the connector terminals faces the center of the valve body.
^
Change or top off ATF after repair.
Tightening torques