A8 Quattro Sedan V8-4.2L (AKB) (2002)
-
Press awl through adhesive sealing material from inside in lower window corner, until eye of awl is visible outside of vehicle.
-
Thread beginning of cutting wire through eye and pull into vehicle interior.
-
Thread cutting wire through winding device and clamp securely.
-
Lay cutting wire all around rear window as shown in illustration (dotted line).
-
Press cutting wire - 1 - under rear window - 2 - all the way around.
3
-
Adhesive sealing material
-
Lay end of cutting wire around stop buffer (arrow) and tighten together with bolt for rear lid hinge.
-
Insert VAG1474/10 protective foil between molded headliner and rear window.