A8 Quattro Sedan V8-4.2L (AKB) (2002)
Window Shade Motor: Service and Repair
Rear Window Shade Motor, Removing and Installing
Rear Window Shade Motor, Removing And Installing
Removing
-
Remove hatshelf.
-
Remove bolt - 1 - of drive disc - 2 - and pull out drive disc.
-
Separate tie wrap - 3 -.
-
Remove connector - 4 -.
-
Remove screws - 2 -.
-
Remove rear window shade motor - 1 -.
-
Check form of drive gear in drive disc.
-
An intact star shaped drive gear (arrow) permits installation of motor without further measures.
-
If hexagon-drive gear or star shaped drive gear drive disc are worn, replace drive disc for new star shaped gear from small parts set.
Installing