A8 Quattro Sedan V8-4.2L (AUX) (2001)
Parking Brake Lever: Service and Repair
Parking Brake Lever, Removing and Installing
Removing
-
For Quattro vehicles, remove rear exhaust system.
-
Remove center heat insulations.
-
Unscrew adjustment nut from pull-lever.
-
Remove compensator.
-
Remove boot.
-
Remove center console
-
Unthread locking ring -3- from bearing bolt.
-
Press bearing bolt out in direction of arrow.
-
Slide parking brake lever slightly rearward and remove.
When installing, pay particular attention to the following points:
-
Insert locking ring carefully.
-
With parking brake lever in released position, securely clamp locking segment and clamping piece to angle bracket free of radial stress.
-
Insert boot carefully.
-
Install exhaust system free of stress.
-
Adjusting parking brake; Refer to parking brake