A8 Quattro Sedan V8-4.2L (AUX) (2001)
-
Remove three screws -5- and -6- as well as Torx screw (T25) -9- and then remove lower steering column switch cover.
-
Disconnect electrical connector for electrical steering column adjustment.
-
Remove both screws -1- and remove switch -2- from steering column switch cover.
Installing:
-
First attach steering column switch -2- to steering column with inside hex screw -3- to provide gap of -a = 3 mm (1/8 in.) between switch and
steering wheel -1-.
-
Remove steering wheel again and continue installation in reverse order of removal.