audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Expansion Block/Orifice Tube > < Evaporator Drain Tube|Testing and Inspection
Page 1
background image

Evaporator Drain Tube: Service and Repair

Condensation drain hose with valve (driver/passenger side), checking, removing and installing

NOTE:  If complaints are received regarding moisture in passenger compartment, check the drain hose -A-, the relevant valve -B- and the area below the
air conditioner housing -C- for soiling. Remove electronics box-plenum if necessary; illustration shows drain hose on removed components.

Removing and installing

-

Remove side trim of center console on driver and passenger side, respectively.

-

Remove condensation drain hose from air conditioner housing and pull out of the center tunnel.

NOTE:

-

Push condensation drain valve -A- through the floor panel of the center tunnel.

-

Lock rib -B- fully in the panel of the center tunnel.

Expansion Block/Orifice Tube > < Evaporator Drain Tube|Testing and Inspection