audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Headlamp Alignment Sensor > < Headlamp Alignment Actuator|Service and Repair
Page 1
background image

Headlamp Alignment Control Module: Service and Repair

Removing:

See Remove trim of right B-pillar.  

-

The control module -1- is mounted under the trim for the right B-pillar.

-

Disconnect electrical connector.

-

Remove both bolts -2-.

Installing:

-

Install in reverse order of installation

Headlamp Alignment Sensor > < Headlamp Alignment Actuator|Service and Repair