A8 Quattro Sedan V8-4.2L (AUX) (2001)
/Page-2374001.png)
Headlamp Control Module: Service and Repair
Control Module For HID Lamp -J343- (Left Side)
Control Module For High-Intensity Gas Discharge Lamp -J343-, Left, Removing and Installing
Removing
-
Remove wheel housing liner, front left.
-
Disconnect electrical harness connector from control module for high-intensity gas discharge lamp -J433- at headlight and remove cable securing
mechanism (cable tie).
-
Remove both bolts -2- and remove control module -1- together with bracket.
-
Remove Phillips-head screws and remove control module -1- from bracket.
Installing
-
Complete installation in reverse order of removal.
