audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Final Drive Fluid <--> [Fluid - Differential] > < ATF, Checking Level and Changing|Page 1068
Page 2
background image

CAUTION!

Do not push the filler nozzle to the top. Otherwise, the oil cap could spring off.

^

Put selector lever in "P" position and run engine at idle (closed throttle position).

^

Add more ATF until excess escapes through hole for ATF filler plug -2-.

^

With brake pedal pushed down and engine at idle, move selector lever through all positions (P, R, N, D, 4, 3, 2). Hold selector lever in each
position for approximately 10 seconds.

^

Check ATF level and top off.

Notes: 

^

All of the test requirements and notes must be complied with.

^

If it is necessary to adjust the ATF level, let the ATF cool to 30°C.

Final Drive Fluid <--> [Fluid - Differential] > < ATF, Checking Level and Changing|Page 1068