A8 Quattro Sedan V8-4.2L (AUX) (2001)
/Page-349001.png)
Front Final Drive Fluid: Testing and Inspection
Front Final Drive Fluid Level, Checking and Topping Off
Required special tools:
^
Tray V.A.G 1306
^
Warm up gear oil in final drive to approximately 60°C (140°F) by briefly driving the car.
^
Drive vehicle onto lift and let gear oil settle for about two minutes.
Note:
The vehicle must be level.
^
Position drip tray V.A.G 1306.
^
Remove plug -arrow-.
The fluid level must reach the lower edge of the filler opening.
^
Top up transmission fluid if necessary.
Note:
Always replace the O-ring on the filler plug.
Tightening torque
Filler plug M18: 35 Nm (26 ft. lbs.)
