A8 Quattro Sedan V8-4.2L (AUX) (2001)
/Page-323010.png)
-
Tighten camshaft gears.
Note:
The -T40005- serves as a retainer.
-
Remove -T40005-.
-
Remove 5mm hex socket wrench.
-
Turn tensioning lever using 8mm hex socket wrench in direction of -arrow- until -T40011- can be pulled out.
-
Turn crankshaft two complete rotations in direction of engine rotation until crankshaft stands at TDC cyl. 5 again.
^
The large holes -arrow- on securing plates at camshaft gears must align on inside.
-
Check dimension -a- between tensioning lever and tensioner housing.
^
Dimension -a- =5.0 +/- 1.0mm
Note:
If dimension -a- is not obtained, repeat adjustment.
