A8 Quattro Sedan V8-4.2L (AUX) (2001)
^
Screw home threaded stems. This lifts the bonded rubber bushings slightly off the wheel bearing housing.
^
Insert pin 3293/1.
Fig. 7 Pressing out bonded rubber bushing
A = Hex bolt M10 x 80
^
Install cross-piece 3292/2 using the hex bolts provided.
^
Press out one half of the bushing by screwing the stem into the crosspiece.
Fig. 8 Pressing out bonded rubber bushing
^
Insert special tool 3349 into second half of bushing.
^
Insert thrust piece 3349/1 with threaded stem 3292/3.
^
Press off second half of bushing by screwing in stem 3292/3.
Fig. 9 Pressing in bonded rubber bushing
^
Install new bushings in wheel bearing housing using thrust pieces 3292/3 and threaded stem.
Note: Install bushings carefully to avoid tilting.