A8 Quattro Sedan V8-4.2L (AUX) (2001)
-
Switch on printer with Print button lamp in (button lights up).
-
Press button -1- for "Rapid data transfer."
When this display appears:
Rapid data transfer
HELP
In put address word XX
-
Press buttons -0- and -1- for address word "Engine electronics" and confirm entry with -Q- button.
Indicated on display: control module identification (example).
4D0907559 4,2L V815V G 0003
->
Coding 06753
WSC 12345
-
Press -> button twice.
When this display appears:
Rapid data transfer
HELP
Select function XX
-
Input "08" to select function "Read Measuring Value Block" and confirm entry with -Q- button.
When this display appears:
Read Measuring Value Block
Q
Input display group number XXX
-
Press buttons -0-, -6- and -2- for display group number 062 and confirm entry with -Q- button.
When this display appears:
Read Measuring Value Block 62
->
xx%
xx%
73%
xx%
-
Check display in display field 3 (accelerator pedal position).
-
Press accelerator pedal all the way down and hold in position.
-
Specification: 65-69 % (accelerator pedal pressed down)
-
Press accelerator all the way down (past Kick-Down point)
-
Specification: 70-74 % (accelerator pedal pressed down past kick-down point)
If the specification is not obtained:
-
Remove knee protection bar on driver's side
-
Remove left front floor mat.
-
Unscrew nut -3-.
-
Unscrew Allen bolt -2-.