audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Fuel Injector Volume, Leakage & Spray Pattern, Checking|Page 2597 > < Fuel Injector Volume, Leakage & Spray Pattern, Checking|Page 2595
Page 2
background image

If the diode test lamp does not light up:

-

Test for continuity in the wiring from socket 1 to fuel pump relay via fuse for injectors. If necessary, repair open circuit.

Checking wiring connections

-

Switch ignition off.

-

Disconnect harness connector from injector to be tested.

-

Connect VAG1598/31 test box to wiring harness for engine control module. Do not connect to the engine control module itself.  Refer to "Scan
Tool Testing/Scan Tool Connecting and Initial Checks/Connecting VAG1598/31 Test Box" See: Computers and Control Systems/Testing and
Inspection 

Fuel Injector Volume, Leakage & Spray Pattern, Checking|Page 2597 > < Fuel Injector Volume, Leakage & Spray Pattern, Checking|Page 2595