A8 Quattro Sedan V8-4.2L (AUX) (2001)
/Page-1702003.png)
-
Installing
-
Make sure connector - 3 - locks in completely (audible).
-
Screw in Torx bolt T30 left and right - 7 - in threaded bushing - 6 - of airbag.
-
Tighten screws with 10 Nm (7 ft.lb.).
CAUTION: Make sure that when connecting battery ground strap/cable no one is in the vehicle.
-
Switch ignition on and connect battery ground strap/cable.
Fig 1 Remove airbag unit
-
Remove airbag unit at rear (left and right) of steering wheel using Torx insert T30.
