A8 Quattro Sedan V8-4.2L (AUX) (2001)
Fig. 2 Securing side curtain airbag at B-pillar
1
-
Side curtain airbag
8
-
Insert securing pin in guide hole below threaded hole.
-
Install bolts - 5 -.
Tightening torque: 5.5 Nm
Fig. 3 Securing side curtain airbag to A-pillar
1-
Side curtain airbag
-
Install bolts - 5 -.
-
Tightening torque: 5.5 Nm
3
-
Tension strap
-
Install bolts - 4 -.
Tightening torque: 5.5 Nm
-
Do not rotate module when installing bolts - 4 -.
Fig. 4 Disconnect harness connector for side curtain airbag
-
Press catches - A - and disconnect connector in direction of arrow.
-
Use a screwdriver to pry out clip - 1 -.
NOTE:
-
After connecting battery, vehicle options (radio, clock, electric window regulator) must be checked according to repair manual and/or user
manual.
-
If the Airbag Malfunction Indicator Lamp (MIL) - K75 - signals a malfunction, DTC memory must be erased and then checked again using the
VAG1551 scan tool.