A8 Quattro Sedan V8-4.2L (AUX) (2001)
Clockspring Assembly / Spiral Cable: Service and Repair
Return Ring With Spiral Spring(from 07.97on),removing And Installing
CAUTION: On vehicles equipped with Audi Telematics by OnStar(R), switch-off the emergency (backup) battery for the Telematic/Telephone
Control Module prior to disconnecting the vehicle battery. Switch-on the emergency (back-up) battery after reconnecting the vehicle battery.
CAUTION:
-
Note safety specifications when working on airbag.
-
Steering wheel and return ring with spiral spring can only be removed with wheels in straight-ahead position.
-
Remove airbag unit.
-
Removing steering wheel or with sport steering wheel.
-
Remove trim for steering column switch.
-
Disconnect connector - 1 -.
-
Disengage latch (arrows) and remove return ring with spiral spring from steering column switch.
CAUTION: Return ring with spiral spring must not be turned in removed condition.
NOTE: The return ring with spiral spring is secured with a tie wrap in center position as a new part.