A8 Quattro Sedan V8-4.2L (AUX) (2001)
Side Air Bag: Service and Repair
Front Side Airbag,Removing And Installing
Front Side Airbag,Removing And Installing
Removing
CAUTION!
Note safety specifications when working on airbag.
-
For vehicles with coded radio unit, radio/navigation system (RNS) note coding; ask if necessary.
-
Disconnect battery ground strap/cable and cover negative pole.
-
Remove front seat.
-
Remove seatback cover.
-
Turn over lock bracket -4- and disconnect connector -2- from side airbag -1-.
-
Remove 2 screws -3- (5.1 Nm/44 in. lb).
5 - Fasten ground cable with lower screw -3-
-
Remove 2 screws -2- (3.5 Nm/31 in. lb).
-
Press side airbag -1- approx 10 mm forward , unhook from brackets -3- and remove.
Installing
Installation is done in reverse sequence, noting the following:
CAUTION!
In order to ensure function of side airbag, new upholstery clips must be installed to seatback cover at the same location prior to removal.