A8 Quattro Sedan V8-4.2L (AUX) (2001)
/Page-1733002.png)
Installed position of connector (orange) -3- for side airbag left and right: near C-pillar.
-
Cut cable tie of connector.
-
Insert connector together on both sides and slide foam tube -1- over.
-
Install rear seat bench.
-
Switch ignition on.
WARNING!
When connecting battery make sure no one is in the vehicle
-
Connect battery.
-
Remove label for disabled rear side airbags.
-
Code control module to enable rear side airbags:
-
Fill out registration card and send card to responsible sales center or importer for registration.
