A8 Quattro Sedan V8-4.2L (AUX) (2001)
Seat Sensor/Switch: Service and Repair
Front Occupied Seat Sensor, Removing and Installing
Front Occupied Seat Sensor, Removing And Installing
Removing
CAUTION!
Note safety specifications when working on airbag.
-
For vehicles with coded radio unit, radio/navigation system (RNS) note coding; ask if necessary.
-
Disconnect battery ground strap/cable and cover negative pole.
-
Remove front seat.
-
Removing seat cover.
-
Cut through cable ties.
-
Remove connector -1- for occupied seat sensor and seat heater and disconnect.
2 - Connector for side airbag
-
Remove seat cushion with sensor mat and seat heater.
NOTE: Sensor mat for occupied seat sensor is available as replacement part only in connection with seat heater and seat cushion.
Installing
Installation is done in reverse sequence, noting the following:
CAUTION!
Sensor mat must not be creased, otherwise mat will malfunction.
-
After installation check function of sensor mat.
CAUTION!
Note instructions when installing seats.