A8 Quattro Sedan V8-4.2L (AUX) (2001)
/Page-226001.png)
Accelerator Pedal Position Sensor: Service and Repair
Removing
-
Remove knee protection bar on drivers side
-
Remove left front floor mat.
-
Unscrew nut -3-.
-
Unscrew Allen bolt -2-.
-
Remove A-pillar trim bottom left -1-.
-
Remove left air channel below instrument cluster.
-
Disconnect operating rod -1- from accelerator pedal -2- -arrow-.
-
Unscrew accelerator pedal position sensor.
Installing
Installation is the reverse of removal; during installation observe the following.
