A8 Quattro Sedan V8-4.2L (AUX) (2001)
/Page-1462003.png)
^
Remove nut -1-, remove hex bolt and pull both links -2- out upward.
The slits in the wheel bearing housing must not be widened using a chisel or similar!
^
Swing wheel bearing housing in direction of arrow away to side, when doing this pull drive axle pin out from wheel hub.
^
Take off wheel bearing housing.
^
Remove ball screws -1-
^
Remove wheel bearing unit.
Fig. 1 Pressing wheel hub out of wheel bearing
