A8 Quattro Sedan V8-4.2L (AUX) (2001)
^
Press bracket (together with ball bearing) onto left drive flange as follows:
^
Place drive flange on pressure plate VW 401.
^
Press bracket on using thrust disc VW412, tubeVW415Aand driving sleeve.
CAUTION!
The press tube 2040 shown in the illustration should not be used (it is too short). Use tube VW415 A instead.
^
Install circlip (arrow-A-).
^
Install left drive flange .
^
Check final drive fluid level and correct as necessary .
Tightening torques