A8 Quattro Sedan V8-4.2L (AUX) (2001)
/Page-1118001.png)
Drive/Propeller Shaft: Adjustments
Drive Shaft (Carbon Fiber)
Drive Shaft (Carbon Fiber)
Checking
^
Remove crossmember (arrows).
^
Remove rear exhaust system (arrows).
^
Remove left catalytic converter.
^
Remove heat shields over drive shaft.
^
Remove tunnel supports (arrows).
^
Use alignment fixture 3139 with adaptor 3139/2, as shown, and tighten plastic nuts.
^
Loosen drive shaft center bearing mounting bolts (to body).
^
Remove mounting bolts and shims.
