A8 Quattro Sedan V8-4.2L (AUX) (2001)
/Page-1196002.png)
^
Remove impulse wheel for speedometer VSS -G22- from drive flange or bracket.
Installing
^
Install impulse wheel for VSS-G22 (arrow) on drive flange and check installation position.
Notes:
^
The driver on the impulse wheel must engage in the groove of the drive flange.
^
If necessary, apply Vaseline to the contact surface of the impulse wheel in order to keep it in proper position during installation.
^
Press bracket (together with ball bearing) onto left drive flange as follows:
^
Place drive flange on pressure plate VW 401.
^
Press bracket on using thrust disc VW 412, tube VW 415 A and driving sleeve .
CAUTION!
The press tube 2040 shown in the illustration should not be used (it is too short). Use tube VW 415 A instead.
