A8 Quattro Sedan V8-4.2L (BFM) (2005)
/Page-3229005.png)
-
Connect the electrical connector - 1 - to the circuit board.
-
Slide the electrical connector - 1 - into the protective cover - 2 -.
-
Install ashtray and center console cover panel.
-
Install the handle on the selector lever. Refer to => [ Selector Lever Handle ] See: Service and Repair/Removal and Replacement/Selector Lever
Handle.
-
Selector mechanism, checking, refer to => [ Selector Mechanism, Checking ] See: Service and Repair/Procedures.
