A8 Quattro Sedan V8-4.2L (BGK) (2006)
Refrigerator Control Unit: Service and Repair
Cooler Compressor Control Module
Removing
-
Remove cooler => [ Cooler ] See: Service and Repair/Cooler.
-
Using a rotating motion, pull off control module from bracket - arrow 1 -.
-
Remove control module - arrow 2 - upward.
-
Press off electrical harness connector - 2 - in direction of arrow from compressor.
-
Disconnect electrical harness connectors - 1 - on control module.
Installing
Installation is reverse of removal.