A8 Quattro Sedan V8-4.2L (BGK) (2006)
-
Bumper - 1 - must not be removed.
-
Remove bolts - 3 - and remove tension strut brackets -2-.
-
Bumper bracket - 4 -.
-
To remove towing eye mount - 6 -, remove combination bolt - 7 - from nut - 5 -.
-
When installing, tighten bolts to Nm.
-
Towing eye mount installed only on the right side.
Removing ACC Sensor
Radar sensor is located behind bumper cover.
-
Remove front bumper cover.
-
Remove hex bolts - 1 -.
-
Remove sensor and disconnect harness connector.
-
When installing, tighten hex bolts to 8 Nm.