A8 Quattro Sedan V8-4.2L (BGK) (2006)
‹› Secured by clipping into door lock -arrow-.
‹› Engage in interior door mechanism => [ Engaging Release in Interior Door Mechanism ].
5 - Release Lever
‹› Insert release into operating lever in direction of arrow.
‹› Swing release 90° and clip it in door lock.
6 - Assembly Carrier
‹› Guide cables for interior door mechanism, closing assist through assembly carrier as shown and press in grommets.
7 - Release
‹› Only for vehicles with closing assist
‹› Pull through assembly carrier and engage in closing assist motor.
‹› Engage release in motor for closing assist => [ Engaging and Disengaging the Cable ] See: Service and Repair/Rear Door Closing Aid Motor.
8 - Seal
‹› Slide gasket sideways into door lock.
9 - Bolt
‹› 20 Nm
Engaging Release in Interior Door Mechanism
-
When installing door trim, cable - 2 - must be engaged into interior door mechanism - 1 - from top downward as shown.
-
Clip cable - arrow - into interior door mechanism.
Lock Cover