A8 Quattro Sedan V8-4.2L (BGK) (2006)
^
When unlocked, locking bar (arrow) must be in upper position.
-
Check by pressing locking bar (arrow) down.
-
Fasten trunk lid lock (with trunk lid open) using a pin.
^
The power latching mechanism pulls down locking bar (arrow) by approx. 6 mm.
If there are deviations:
-
Check the trunk lid lock and the power latching with Guided Fault Finding (GFF) and replace if necessary.
6.
For vehicles to VIN 4E_5N016187:
-
Engage lifting pins (arrow) in left/right stop buffers (located on left and right sides of trunk lid) by pressing them inwards and turning 90° to
the left (pins will remain in).
7.
For all VINs:
To ensure that the trunk lid opens and closes after replacing the hinges, activate the automatic trunk release as follows:
^
Test must be carried out after vehicle has been left at room temperature (15°C to 20°C)/(59°F to 68°F) for at least 4 hours.
^
The engine must be OFF.
^
Battery must have at least 12V (measured at battery terminals).