A8 Quattro Sedan V8-4.2L (BGK) (2006)
/Page-6861002.png)
-
Fold the center armrest down (bottom position). Both center armrests must have the same position.
-
If this is not the case, loosen bolt - 1 -.
-
Slide support foot halves - 2 - and - 3 - toward each other.
-
Repeat the adjusting procedure until the center armrest are in the same location in the top and bottom positions.
-
Install split center armrest => [ Divided Front Center Armrest ] See: Removal and Replacement/Divided Front Center Armrest.
Tightening torque:
Threaded connections on support base halves: 15 Nm
