A8 Quattro Sedan V8-4.2L (BGK) (2006)
-
Remove rear wheelhousing trim => [ Rear Wheel Housing Trim ] See: Service and Repair/Removal and Replacement/Trim.
-
Connect harness connector to crash sensors at C-pillar => [ Rear Side Curtain Airbag Crash Sensor ] See: Restraint Systems/Air Bag
Systems/Impact Sensor/Service and Repair/Rear Side Curtain Airbag Crash Sensor.
-
Install rear wheelhousing trim => [ Rear Wheel Housing Trim ] See: Service and Repair/Removal and Replacement/Trim.
All vehicles
-
Remove seat pan => [ Seat Pan ] See: Seats/Service and Repair/Removal and Replacement/Individual Power Rear Seats.
-
Remove switched-off side airbag sticker from rear door frame.
-
Remove remaining adhesive from door frame with cleaning solution.
-
Change coding of airbag control module to the code for rear side airbags.
-
Fill out registration card and send to responsible distributor or importer for registration. Remove sheet 3 of the registration card from the owner
information packet for the customer.