A8 Quattro Sedan V8-4.2L (BGK) (2006)
-
When looking toward front, rotate wind deflector motor downward approximately 90°.
-
Pull out motor toward rear.
Installing
-
Guide in motor through cutout for light.
-
Insert control lever - 2 - into opening of front section of frame and pin - arrow - in both longitudinal holes of positioning bow.
-
Bring motor into bolting position.
-
Bolt motor with both Torx bolts (T8).
-
Connect motor.
-
Install panel for light cutout.
CAUTION!
An initialization must be performed after installing sunroof motor.