A8 Quattro Sedan V8-4.2L (BGK) (2006)
/Page-3803002.png)
Installing
-
Clean the contact surfaces on the wheel hub and brake disc. Remove any corrosion.
-
Place the brake disc on the hub.
‹› When positioning the brake disc, do not tilt it on the wheel hub.
-
Install the securing bolt - 6 - and tighten it to 5 Nm.
-
Install the brake caliper. Refer to => [ Brake Caliper ]. See: Service and Repair/Front Wheel Ceramic Brakes, PR-1LW/Brake Caliper
-
Install the wheels.
Make sure the brakes are working correctly before driving the vehicle for the first time.
